Retour à la liste des produits
+
ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape | ampliTex™-PP (twill 2/2 - charcoal) + powerRibs™-PP + NFPP. AmpliTex™-PP and powerRibs™-PP offer both premium finishes through single-step production and cost-effective drop-in solutions over IMPP parts across vehicle segments. Bcomp's natural fibre solutions for automotive interiors can cut weight by up to 50% while maintaining equivalent performance and reducing both CO2 emissions by up to 60% and plastic by up to 70%.

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape

Bcomp

  • Catégorie : Renforts
  • Type(s) : Laminé
  • Aucun échantillon fourni par Alliance for European Flax-Linen and Hemp

  • Caractéristiques

    • Référence : ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape

    Composition :

    • Mix 100%

  • Descriptif - Points forts

    ampliTex™-PP (twill 2/2 - charcoal) + powerRibs™-PP + NFPP. AmpliTex™-PP and powerRibs™-PP offer both premium finishes through single-step production and cost-effective drop-in solutions over IMPP parts across vehicle segments. Bcomp's natural fibre solutions for automotive interiors can cut weight by up to 50% while maintaining equivalent performance and reducing both CO2 emissions by up to 60% and plastic by up to 70%.

  • Certifications et labels du produit

    • Pas de certification ou label
Contacter le fournisseur

Savoir-faire et services de la société

  1. BCOMP

    Suisse

    Fibre(s) : Lin

    Secteur(s) : Usages techniques

    Savoir-faire : Production pour usages techniques : Production de produits semi-finis pour pour le renforcement

    Voir la fiche

Autres produits de Bcomp

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape | ampliTex™-PP (panama 4/4 - duotone) + powerRibs™-PP + NFPP. AmpliTex™-PP and powerRibs™-PP offer both premium finishes through single-step production and cost-effective drop-in solutions over IMPP parts across vehicle segments. Bcomp's natural fibre solutions for automotive interiors can cut weight by up to 50% while maintaining equivalent performance and reducing both CO2 emissions by up to 60% and plastic by up to 70%.

Bcomp

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape | ampliTex™-PP (panama 2/2 - natural) + powerRibs™-PP + NFPP. AmpliTex™-PP and powerRibs™-PP offer both premium finishes through single-step production and cost-effective drop-in solutions over IMPP parts across vehicle segments. Bcomp's natural fibre solutions for automotive interiors can cut weight by up to 50% while maintaining equivalent performance and reducing both CO2 emissions by up to 60% and plastic by up to 70%.

Bcomp

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape

ampliTex™ thermoset 3D-shape | Composition: ampliTex™ (biaxial – natural) + powerRibs™. Bcomp’s natural fibre-based technologies harness the natural mechanical properties of flax fibres, optimised with the latest lightweighting knowledge. ampliTex™ and powerRibs™ add maximum stiffness at minimal weight, matching the performance of thin-walled monolithic carbon fibre parts while improving safety with no sharp shattering, up to 85% lower CO2 footprint, viable end-of-life options, and 5x better vibration damping.

Bcomp

ampliTex™ thermoset 3D-shape

ampliTex™ thermoset 3D-shape | Composition: ampliTex™ (twill 2/2 – charcoal) + powerRibs™. Bcomp’s natural fibre-based technologies harness the natural mechanical properties of flax fibres, optimised with the latest lightweighting knowledge. ampliTex™ and powerRibs™ add maximum stiffness at minimal weight, matching the performance of thin-walled monolithic carbon fibre parts while improving safety with no sharp shattering, up to 85% lower CO2 footprint, viable end-of-life options, and 5x better vibration damping.

Bcomp

ampliTex™ thermoset 3D-shape

ampliTex™-PP with PC/ABS back-injection | Composition: ampliTex™-PP (panama 4/4 - charcoal) + PC/ABS. Process: Designed for compatibility with back-injection moulding using PC/ABS. Key benefits: Bcomp's natural fibre solutions for automotive interiors can cut weight by up to 50% while maintaining equivalent performance and reducing both CO2 emissions by up to 60% and plastic by up to 70%. These materials offer unique design possibilities with one manufacturing tool for every brand while improving safety with no sharp edges.

Bcomp

ampliTex™-PP with PC/ABS back-injection

SANDWICH PANEL WITH AMPLITEX™ | ampliTex™ (300 gsm–twill 2/2 – natural) + foam. Process:Thermoset resin vacuum infused sandwich panel with ampliTex™ skins. Key Benefits: Reducing the environmental impact compared to standard materials such as glass- or carbon fibres by using a renewable material, which also enables viable end of life options like thermal energy recovery without residual waste rather than going to landfill. Bcomp’s materials also off er up to 5 times higher vibration damping and unique design opportunities.

Bcomp

SANDWICH PANEL WITH AMPLITEX™

ampliTex™ thermoset 3D-shape | Composition: ampliTex™ (UD – natural) + ampliTex™ (twill 2/2 – natural). Bcomp’s natural fibre-based technologies harness the natural mechanical properties of flax fibres, optimised with the latest lightweighting knowledge. ampliTex™ and powerRibs™ add maximum stiffness at minimal weight, matching the performance of thin-walled monolithic carbon fibre parts while improving safety with no sharp shattering, up to 85% lower CO2 footprint, viable end-of-life options, and 5x better vibration damping.

Bcomp

ampliTex™ thermoset 3D-shape

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape | Composition: ampliTex™-PP (bi-axial - natural) + powerRibs™-PP + NFPP. Key benefits: Bcomp's natural fibre solutions for automotive interiors can cut weight by up to 50% while maintaining equivalent performance and reducing both CO2 emissions by up to 60% and plastic by up to 70%. These materials offer unique design possibilities for every brand while improving safety with no sharp edges.

Bcomp

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape

ampliTex™ thermoset 3D-shape | Composition: ampliTex™ (UD – hybrid flax + carbon). Processes in the same moulds as for carbon fibre parts. Key Benefits: Bcomp’s natural fibre-based technologies harness the natural mechanical properties of flax fibres, optimised with the latest lightweighting knowledge. This ampliTex™ hybrid technical fabric combines the strength of carbon with the natural damping properties of flax, delivering outstanding mechanical performance with enhanced vibration absorption and fatigue resistance.

Bcomp

ampliTex™ thermoset 3D-shape

ampliTex™ thermoset 3D-shape | Composition: ampliTex™ (twill 2/2 – natural) + powerRibs™. Bcomp’s natural fibre-based technologies harness the natural mechanical properties of flax fibres, optimised with the latest lightweighting knowledge. ampliTex™ and powerRibs™ add maximum stiffness at minimal weight, matching the performance of thin-walled monolithic carbon fibre parts while improving safety with no sharp shattering, up to 85% lower CO2 footprint, viable end-of-life options, and 5x better vibration damping.

Bcomp

ampliTex™ thermoset 3D-shape

AMPLITEX™ + POWERRIBS™ | AMPLITEX™ TECHNICAL FABRIC + POWERRIBS™ REINFORCEMENT GRID BY BCOMP Composition: ampliTex™ technical fabrics + powerRibs™ reinforcement grid Process: Thermoset composite part made with vacuum infusion Key Benefits: ampliTex™ and powerRibs™ add maximum stiffness at minimal weight, <85% lower CO2 footprint, viable end-of-life options, and 5x better vibration damping. ampliTex™ offers unique design opportunities with different fabric architectures and colours. WWW.BCOMP.CH

Bcomp

AMPLITEX™ + POWERRIBS™

Services | ACV, Accompagnement et formation process, Modélisation numérique, Gestion de projet, Études techniques.

Bcomp

Services

ampliTex™ | Renforts tissés pour applications composites

Bcomp

ampliTex™

powerRibs™ | Grille de renfort en lin pour pièces composites

Bcomp

powerRibs™