Selection technical uses

My research

  • Technical uses
Reset

Filter

Sectors

Product categories

European Flax-Linen Certifications

Country

Product type

125 products

171209-Nm9,5 twill 2/2-D epoxy prepreg | Flax twill (Nm 9,5) with an epoxy matrix.

Flipts En Dobbels

171209-Nm9,5 twill 2/2-D epoxy prepreg

2626 - 1818 - twill 2/2 red | Flax twill with a colored thermoplastic matrix.

Flipts En Dobbels

2626 - 1818 - twill 2/2 red

Carded cut flax fibres or pre-cottonized fibres | Carded cut flax fibres or pre-cottonized fibres from 30 mm to 120 mm.

COOPERATIVE DE TEILLAGE DU NEUBOURG - CTLN

Carded cut flax fibres or pre-cottonized fibres

Hemp shives | This hemp shives are thus used in the following sectors: Animal bedding, Soil mulching, Construction.

La Chanvrière

Hemp shives

Hemp fibres | Fiber: defibered, refined fiber (length +/-10 cm), cottonized fiber, mid-length fiber sliver, long fiber sliver.

La Chanvrière

Hemp fibres

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape | ampliTex™-PP (panama 2/2 - natural) + powerRibs™-PP + NFPP. AmpliTex™-PP and powerRibs™-PP offer both premium finishes through single-step production and cost-effective drop-in solutions over IMPP parts across vehicle segments. Bcomp's natural fibre solutions for automotive interiors can cut weight by up to 50% while maintaining equivalent performance and reducing both CO2 emissions by up to 60% and plastic by up to 70%.

B COMP

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape | ampliTex™-PP (twill 2/2 - charcoal) + powerRibs™-PP + NFPP. AmpliTex™-PP and powerRibs™-PP offer both premium finishes through single-step production and cost-effective drop-in solutions over IMPP parts across vehicle segments. Bcomp's natural fibre solutions for automotive interiors can cut weight by up to 50% while maintaining equivalent performance and reducing both CO2 emissions by up to 60% and plastic by up to 70%.

B COMP

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape | ampliTex™-PP (panama 4/4 - duotone) + powerRibs™-PP + NFPP. AmpliTex™-PP and powerRibs™-PP offer both premium finishes through single-step production and cost-effective drop-in solutions over IMPP parts across vehicle segments. Bcomp's natural fibre solutions for automotive interiors can cut weight by up to 50% while maintaining equivalent performance and reducing both CO2 emissions by up to 60% and plastic by up to 70%.

B COMP

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape

HEMP TWILL | Hemp Twill. Twill 2/2 - width 100 cm.

Linificio e Canapifico Nazionale S.R.L. Società Benefit

HEMP TWILL

ampliTex™ thermoset 3D-shape | Composition: ampliTex™ (UD – hybrid flax + carbon). Processes in the same moulds as for carbon fibre parts. Key Benefits: Bcomp’s natural fibre-based technologies harness the natural mechanical properties of flax fibres, optimised with the latest lightweighting knowledge. This ampliTex™ hybrid technical fabric combines the strength of carbon with the natural damping properties of flax, delivering outstanding mechanical performance with enhanced vibration absorption and fatigue resistance.

B COMP

ampliTex™ thermoset 3D-shape

ampliTex™ thermoset 3D-shape | Composition: ampliTex™ (twill 2/2 – natural) + powerRibs™. Bcomp’s natural fibre-based technologies harness the natural mechanical properties of flax fibres, optimised with the latest lightweighting knowledge. ampliTex™ and powerRibs™ add maximum stiffness at minimal weight, matching the performance of thin-walled monolithic carbon fibre parts while improving safety with no sharp shattering, up to 85% lower CO2 footprint, viable end-of-life options, and 5x better vibration damping.

B COMP

ampliTex™ thermoset 3D-shape

SANDWICH PANEL WITH AMPLITEX™ | ampliTex™ (300 gsm–twill 2/2 – natural) + foam. Process:Thermoset resin vacuum infused sandwich panel with ampliTex™ skins. Key Benefits: Reducing the environmental impact compared to standard materials such as glass- or carbon fibres by using a renewable material, which also enables viable end of life options like thermal energy recovery without residual waste rather than going to landfill. Bcomp’s materials also off er up to 5 times higher vibration damping and unique design opportunities.

B COMP

SANDWICH PANEL WITH AMPLITEX™

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape | Composition: ampliTex™-PP (bi-axial - natural) + powerRibs™-PP + NFPP. Key benefits: Bcomp's natural fibre solutions for automotive interiors can cut weight by up to 50% while maintaining equivalent performance and reducing both CO2 emissions by up to 60% and plastic by up to 70%. These materials offer unique design possibilities for every brand while improving safety with no sharp edges.

B COMP

ampliTex™-PP and powerRibs™-PP thermoplastic 3D-shape

ampliTex™ thermoset 3D-shape | Composition: ampliTex™ (UD – natural) + ampliTex™ (twill 2/2 – natural). Bcomp’s natural fibre-based technologies harness the natural mechanical properties of flax fibres, optimised with the latest lightweighting knowledge. ampliTex™ and powerRibs™ add maximum stiffness at minimal weight, matching the performance of thin-walled monolithic carbon fibre parts while improving safety with no sharp shattering, up to 85% lower CO2 footprint, viable end-of-life options, and 5x better vibration damping.

B COMP

ampliTex™ thermoset 3D-shape

ampliTex™ thermoset 3D-shape | Composition: ampliTex™ (biaxial – natural) + powerRibs™. Bcomp’s natural fibre-based technologies harness the natural mechanical properties of flax fibres, optimised with the latest lightweighting knowledge. ampliTex™ and powerRibs™ add maximum stiffness at minimal weight, matching the performance of thin-walled monolithic carbon fibre parts while improving safety with no sharp shattering, up to 85% lower CO2 footprint, viable end-of-life options, and 5x better vibration damping.

B COMP

ampliTex™ thermoset 3D-shape

ampliTex™-PP with PC/ABS back-injection | Composition: ampliTex™-PP (panama 4/4 - charcoal) + PC/ABS. Process: Designed for compatibility with back-injection moulding using PC/ABS. Key benefits: Bcomp's natural fibre solutions for automotive interiors can cut weight by up to 50% while maintaining equivalent performance and reducing both CO2 emissions by up to 60% and plastic by up to 70%. These materials offer unique design possibilities with one manufacturing tool for every brand while improving safety with no sharp edges.

B COMP

ampliTex™-PP with PC/ABS back-injection